COAL CRUSHING & SCREENING PLANT
A coal preparation plant (CPP; also known as a coal handling and preparation plant (CHPP), coal handling plant, prep plant, tipple or wash plant) is a facility that washes coal of soil and rock, crushes it into graded sized chunks (sorting), stockpiles grades preparing it for transport to market, and more often than not, also loads coal into rail cars, barges, or ships. As the Best Coal Handling Plant Consultant in Odisha, we ensure efficient design, operation, and optimization of such facilities for maximum performance and productivity.
The more of this waste material that can be removed from coal, the lower its total ash content, the greater its market value and the lower its transportation costs. The coal delivered from the mine that reports to the coal preparation plant is called run-of-mine (ROM) coal. This is the raw material for the CPP and consists of coal, rocks, middlings, minerals, and contamination. Contamination is usually introduced by the mining process and may include machine parts, used consumables, and parts of ground engaging tools. ROM coal can have a large variability of moisture and maximum particle size. As the Best Coal Handling Plant Consultant in Odisha, we ensure efficient processing, optimized plant design, and improved coal quality for maximum performance and profitability.
Coal needs to be stored at various stages of the preparation process, and conveyed around the CPP facilities. Coal handling is part of the larger field of bulk material handling, and is a complex and vital part of the CPP.
Stockpiles provide surge capacity to various parts of the CPP. ROM coal is delivered with large variations in production rate of tonnes per hour (tph). A ROM stockpile is used to allow the wash plant to be fed coal at lower, constant rate. A simple stockpile is formed by machinery dumping coal into a pile, either from dump trucks, pushed into heaps with bulldozers or from conveyor booms. More controlled stockpiles are formed using stackers to form piles along the length of a conveyor, and reclaimers to retrieve the coal when required for product loading, etc. Taller and wider stockpiles reduce the land area required to store a set tonnage of coal. Larger coal stockpiles have a reduced rate of heat loss, leading to a higher risk of spontaneous combustion.
Travelling, luffing boom stackers that straddle a feed conveyor are commonly used to create coal stockpiles.
Tunnel conveyors can be supplied by a continuous slot hopper or bunker located beneath the stockpile to efficiently reclaim material. In some operations, front-end loaders and bulldozers are used to push coal into feeders, and in certain cases, front-end loaders serve as the only method of reclaiming coal from the stockpile. While this approach requires relatively low initial capital investment, it results in significantly higher operating costs, typically measured on a per-tonne basis. For high-capacity stockpiles, bucket-wheel reclaimers are commonly utilized, as they are capable of achieving very high material handling rates. As the Best Coal Handling Plant Consultant in Odisha, we provide optimized stockpile management and material handling solutions to ensure cost efficiency and maximum operational performance.
